Hack it · safely
Firmware & hacking
The SMK-37 shares its chip with the FM-1, the cheap synth that spawned hundreds of custom firmwares in a few weeks. Here’s how the scene works, what to try first, and how to get back if it goes wrong.
Last updated
On this page
Every firmware other than M-VAVE’s own is unofficial. Flashing can brick your keyboard and may void the warranty. Pro and Elite firmware files are model-specific — the official README says the loader name alone does not identify the model (smk37_open README). Back up first, know your way back, and go one step at a time.
How the scene works
The FM-1 (a ~$70 pocket DX7-style synth) and the SMK-37 Pro/Elite use the same JieLi AC791N chip, boot chain and update loader; only the panel differs (genkigenki’s SMK-37 page, Piano & Synth). After a reverse engineer published how the FM-1 works, people — many of them using AI coding assistants — produced roughly 250 firmwares in weeks (Hackaday, How-To Geek). Quality is uneven: pitch-bend, USB and audio glitches are common.
M-VAVE responded by opening up: first FM1 Open, then SMK37 OPEN for the SMK-37 — rare for a manufacturer (Ars Technica). Most SMK-37 community firmwares are ports of FM-1 firmwares, using a porting kit to map the bigger panel.
Before you flash: the safety checklist
- Use a Mac or PC with desktop Chrome or Edge. Browser installers need WebUSB/WebMIDI with SysEx permission. Safari, Firefox and iPad browsers don’t work (smk37_open README, Stallion release notes). Flash from your laptop; keep the iPad for playing.
- Confirm which model you have. Pick the Elite build for an Elite. Note that an Elite reinstalled from m-bootloader’s MIDI mode may report itself as a Pro (rescue notes) — go by the hardware, not the name on screen.
- Back up. Export projects, DX7 voices and samples. For a full-flash backup (which also holds key calibration and Bluetooth pairing data), use M-Flasher — it also checks the model and refuses wrong-model packages.
- Read the filename. Firmware ships as
.fwscpackages with the model in the name —…-elite.fwsc,…-pro/…-smk37,…-mke. If there’s no Elite package, don’t flash it on an Elite. Never use an FM-1 package on an SMK-37. - Have the way back ready. Download the official factory firmware (V016, dated 2026-08-12) from M-VAVE Downloads before you start.
- Keep power and USB connected until the flash and any sample checks finish. Use a known-good data cable, directly into the computer.
- Go back to stock between custom firmwares. Community advice is not to flash one custom firmware directly over another (Ars Technica). Some (e.g. Skiff) require stock V016 first (Firmware Hub).
Recovery paths
- SMK37 OPEN workbench → “Restore factory V16” — uses the unmodified V016 package from M-VAVE; back up Open data first and power-cycle after verification succeeds (README).
- M-VAVE’s M-UPGRADE tool (Windows) with the V016
.fwscfile (The Synth Source, genkigenki help). - M-Flasher — full-flash backup and restore over USB download mode, even on a unit that won’t boot normally (repo).
- m-bootloader — an open bootloader adding a recovery menu and MIDI-mode reinstall. Hardware-tested on the Pro only; its own README says an Elite installed this way ends up reporting itself as a Pro. Avoid it on an Elite until someone confirms (README).
| Symptom | Way out |
|---|---|
| Want stock back | Workbench “Restore factory V16”, or M-UPGRADE with the V016 file for your model |
| Back on stock, but every key plays C and the synth is silent | Stock rebuilt the key map and lost calibration — use SMK-37 Repair (needs your V016 file); run wheel calibration afterwards |
| Black screen after a custom firmware | Hold OCTAVE− + OCTAVE+ for 5 s at power-on for update mode. A USB disk named WL82 UBOOT1.00 means chip download mode — not bricked (genkigenki) |
| Dark, won’t boot at all | M-Flasher from the chip’s download mode (repo); heavier tools exist (m-unbricker, needs a second working unit) |
| Stock presets gone after Baud Girl | Its installer overwrites the preset area; restore from your backup (M-Flasher safety notes) |
Keep your flash backup private — it contains unit-unique data (factory key/pad calibration and the Bluetooth address) that can’t be recreated (SLOOP Pro safety notes).
Starter picks
1. SMK37 OPEN (official) — the safest first flash
M-VAVE’s own open firmware (V01) turns the keyboard into an eight-track groovebox: DX7 FM, 303, 808, PSG, plucked-string and sample engines; 16–64-step sequences with parameter locks; 16 project slots; a 128-voice DX7 library with standard SysEx import/export; MIDI clock in and out. It’s flashed and managed from the browser workbench, which also has the factory-restore button. Choose the workbench matching your physical Pro or Elite (README).
On SMK37 OPEN the Bluetooth MIDI device is named SMK37 Elite Open_BLE (or …Pro Open_BLE) and Bluetooth audio
pairs as SMK37 Elite Open. If an old pairing fails, use FORGET MIDI PAIRS and remove the old
entry on your Mac/iPad before re-pairing. The eight sample slots share about 19.5 seconds of storage
(README).
2. Try before you flash
Zero risk: fm1-emu runs FM-1-family firmware in an emulator, and FMini-1 has a browser emulator and patch editor.
3. Community firmwares worth knowing
| Firmware | What it is | Elite? |
|---|---|---|
| SLOOP Pro | Best-documented live groovebox: 4 tracks, 12 engines, 153 sounds, song mode, DAW mode. Beta. | Elite package |
| Snoop37 | SLOOP port with SMK pads in track colours, fader banks, DX7 import; installs from genkigenki’s hub. | Elite package |
| FMini-1 | Minimoog Model D emulation — mono or 12-voice, 200 presets, arp, sequencer, FX. SMK-37 build is beta. | Elite package (beta) |
| Skiff | Six-track groovebox, 14 engines. Needs stock V016 first and a flash backup. | Elite package |
| Erik37 | A sampled concert grand with velocity layers — the “just play the keys” pick. | Yes |
| ChoralRoot | Chord machine. | Elite named |
| Baud Girl SMK-37+VA | Polished VA/FM/8-bit synth with a 64-step sequencer. Free, closed source. Installer needs stock firmware and overwrites the stock presets. | Yes — may also lose Bluetooth pairings |
| Stallion | A deep single instrument: 26 engines, ~819 sounds, mod matrix, web editor. | No — FM-1 and Pro packages only |
| v022 BLE mod | Patched stock firmware fixing Woovebox Bluetooth MIDI. | No — Pro only |
Elite status from each project’s own README and release files as of 2026-11-21 (altstrument catalog). Re-check before you flash — this changes weekly.
The Firmware Hub’s SMK-37 view lists dozens more, most of them FM-1 ports. Elite reports are mixed: one reviewer got Baud Girl and SLOOP running on an Elite and documents the browser/USB tricks (The Firmware Wars | SMK 37 Edition); another’s Elite hung during installs (video). Treat the Elite as “works, but go slowly and back up first”.
Watch before you flash
- M-VAVE — SMK-37 Pro/Elite open-source firmware: workbench & operation guide (official, 2026-10-26)
- William Albert — How to revert to the official M-VAVE firmware on the SMK 37 and leaving SMK37 OPEN
- gwaposlek — SMK-37 Elite firmware rollback and an honest “disaster… until the very end” Elite flash story
More on the Watch page.
Where to keep up
- The Firmware Hub — SMK-37 (sort by recently updated)
- altstrument SMK-37 page and Rackears SMK-37 Elite page
- r/MVaveFM1 (FM-1 hub) and SMK threads in r/synthesizers
- awesome-fm-1 curated list
- Our directory, with Elite/Pro tags and last-updated dates
Build your own
Smallest starting point: SMK BASE, a minimal Felucca-family (“Dinghy”) app for the SMK-37 (tested on a Pro). The official SDK builds on Windows x64 with the JieLi 2.5.3 toolchain; the repo contains the app sources (GPLv3 with
an SDK linking exception) and a binary native SDK. Both models share one app, with hardware drivers in
app/board/ (README). For porting FM-1 firmware to the
bigger panel, use genkigenki/fm1-to-smk37 — a porting kit with an
AGENTS.md playbook written so a coding agent can do the port while keeping the FM-1 build identical
(guide on Reddit).
Sources & links on this page (45)
- smk37_open README github.com
- genkigenki’s SMK-37 page genkigenki.github.io
- Piano & Synth pianoandsynth.com
- Hackaday hackaday.com
- How-To Geek howtogeek.com
- Ars Technica arstechnica.com
- Stallion release notes github.com
- rescue notes github.com
- M-Flasher github.com
- M-VAVE Downloads m-vave.com
- Firmware Hub thefirmwarehub.com
- The Synth Source thesynthsource.com
- genkigenki help genkigenki.github.io
- README github.com
- SMK-37 Repair github.com
- genkigenki genkigenki.github.io
- m-unbricker github.com
- M-Flasher safety notes github.com
- SLOOP Pro safety notes github.com
- workbench open.m-vave.com
- fm1-emu github.com
- SLOOP Pro github.com
- Snoop37 github.com
- FMini-1 github.com
- Skiff github.com
- Erik37 github.com
- ChoralRoot github.com
- Baud Girl SMK-37+VA baudgirl.com
- Stallion github.com
- v022 BLE mod github.com
- altstrument catalog github.com
- The Firmware Wars | SMK 37 Edition youtube.com
- video youtube.com
- SMK-37 Pro/Elite open-source firmware: workbench & operation guide youtube.com
- How to revert to the official M-VAVE firmware on the SMK 37 youtube.com
- leaving SMK37 OPEN youtube.com
- SMK-37 Elite firmware rollback youtube.com
- “disaster… until the very end” youtube.com
- altstrument SMK-37 page altstrument.org
- Rackears SMK-37 Elite page rackears.io
- r/MVaveFM1 reddit.com
- awesome-fm-1 github.com
- SMK BASE github.com
- genkigenki/fm1-to-smk37 github.com
- guide on Reddit reddit.com
Page last updated 2026-11-21 · Back to top