Setup · MacBook Pro
Mac + Logic Pro
Get the SMK-37 playing Logic’s instruments over USB-C or Bluetooth, put the knobs and pads to work, record the keyboard’s own FM synth as audio, and sample it.
Last updated
On this page
- Connect over USB-C (recommended)
- Connect over Bluetooth MIDI
- Map knobs and faders in Logic
- Pads → Drum Machine Designer
- Record the built-in FM synth (USB audio)
- Use it as a sound module alongside Logic
- Sampling in Logic
- MIDI Suite and firmware updates from the Mac
- See it in action
- Bonus: Logic Remote on the iPad
- Mac troubleshooting
- Update to the latest official firmware (V016) first — it fixed key-note latency (how).
- Plug in USB-C, switch the keyboard on, open Logic, make a Software Instrument track, play.
- Map the encoders to Logic parameters with Learn.
- Pads → a Drum Machine Designer kit. They send on channel 10; Logic listens to all channels, so it just works.
- To record the built-in FM synth, choose the SMK-37 as Logic’s audio input and record an audio track.
Menu paths follow Apple’s current Logic Pro guide (Logic Pro 11 and later use Logic Pro → Settings; older versions say Preferences).
Connect over USB-C (recommended)
- Use a USB-C data cable, directly into the Mac. The SMK-37 is class-compliant — no driver. It shows up as both a MIDI device and an audio device, and charges at the same time (LED red = charging, green = full) (Elite manual).
- Turn on the power switch on the back panel.
- Check Audio MIDI Setup (Applications → Utilities). Window → Show MIDI Studio should show the keyboard; Window → Show Audio Devices should list an SMK-37 audio device with input and output.
- Open Logic, create a Software Instrument track and play. If nothing arrives, open Logic Pro → Settings → MIDI → Inputs and tick the SMK-37 port (Apple).
Connect over Bluetooth MIDI
The keyboard has two Bluetooth identities: SMK-37 Elite_BLE is MIDI, and plain
SMK-37 Elite is Bluetooth audio playback (Pro: SMK-37 Pro_BLE / SMK-37 Pro).
For MIDI you want the _BLE one, and you don’t pair it in System Settings
(manual).
- Hold BT on the keyboard until the light flashes (advertising). Steady = connected. Bluetooth is on by default and it reconnects to the last host automatically.
- Audio MIDI Setup → Window → Show MIDI Studio → click the Bluetooth (“Configure Bluetooth”) button in the toolbar (Apple).
- Select
SMK-37 Elite_BLEand click Connect. It now appears in Logic like a wired device. - Moving to another host (e.g. the iPad)? Disconnect/forget it on the Mac first — it only talks to one host at a time.
M-VAVE says wireless adds little latency and suggests a 128-sample buffer. Practical advice: USB for recording and tight drumming, Bluetooth for couch jamming. USB is also the only route for the audio features below.
Map knobs and faders in Logic
The SMK-37 isn’t a Logic-supported control surface; Logic sees it as a generic MIDI controller, and the manual says to use your DAW’s MIDI Learn. Keys, pads, wheels and pedal work immediately.
- Click the Logic parameter you want (a mixer fader, a plug-in knob).
- Logic Pro → Control Surfaces → Learn Assignment for “…” (key command: ⌘L).
- Move the encoder or fader. Logic shows the incoming message; click Learn Mode again to finish (Apple).
- Banks: KNOB BANK switches encoders to K9–16, FADER BANK switches faders to 5–8, and pressing both switches pads to 17–32 — 16 knobs, 8 faders and 32 pads to map in total (manual).
- Smart Controls: open Smart Controls → Inspector → pick a screen control → Parameter Mapping → Learn (Apple).
- To learn pads as buttons, uncheck Ignore MIDI Notes While Learning in the Controller Assignments Action menu.
- What each control sends (CC numbers, note numbers) isn’t published by M-VAVE. Read it from Logic’s MIDI activity display, or change it in MIDI Suite (below). Whether the endless encoders send absolute or relative values is unverified — if a mapped parameter jumps on first touch, that’s why.
- Transport buttons: SEQ PLAY/SEQ REC drive the keyboard’s own sequencer, not Logic. M-VAVE has a video setting the Pro up as a Mackie Control surface for Logic transport (M-VAVE video); it isn’t in the Elite manual, so treat it as “try it” (unverified on the Elite).
Pads → Drum Machine Designer
- Make a drum track: Track → New Software Instrument Track → Library → Electronic Drum Kit → pick a kit (it loads Drum Machine Designer).
- Channels: keys send on channel 1, pads on channel 10 by default; change them by holding GLOBE and turning K2 (keys) or K3 (pads) (manual). Logic tracks receive all channels, so pads play whichever track is selected.
- Line up the notes. In DMD, open a pad’s Input menu → Learn Note → hit the hardware pad (Apple). Or set the SMK-37’s pad notes in MIDI Suite to DMD’s layout, which starts at C1 (note 36) bottom-left.
- Pressure: pad aftertouch (on by default, GLOBE K6) can modulate filter or volume through Smart Controls.
Record the built-in FM synth (USB audio)
Over USB the keyboard is a Core Audio device on macOS — M-VAVE says to “set the input device directly to SMK-37 Elite” for recording and playback, no driver needed (manual).
- Turn the synth on. The FM engine only sounds while PATCH is active; use the Patch page’s Latch so it stays on.
- Logic Pro → Settings → Audio → Devices: set Input Device to the SMK-37 (and Output too if you want Logic to play through the keyboard’s headphone jack). Apply.
- New Audio track, input = the SMK-37, arm it, play, record. Mono vs stereo input is unverified — a reviewer measured 24-bit/44.1 kHz mono on the Pro (via The Synth Source). Check Audio MIDI Setup → Audio Devices → Format and match Logic’s project rate.
- Monitoring: listen either on the keyboard’s headphone jack or through Logic with input monitoring — not both, or you’ll hear a flanged double.
Create an Aggregate Device in Audio MIDI Setup (+ → Create Aggregate Device; tick the SMK-37 and the speakers; set the clock source; enable drift correction on the other device), then pick it in Logic. Restart Logic if it doesn’t appear (Apple). Skip this if you can — it adds complexity.
Use it as a sound module alongside Logic
- Hearing two sounds? The internal synth is answering your keys while Logic plays too. Leave PATCH off when you only want Logic’s instruments, or use Local Control (added in firmware V016) to disconnect the keys from the internal synth (release notes). Its exact menu location is unverified — look in the Patch pages.
- Sequence the FM synth from Logic: Track → New Tracks → External MIDI, with MIDI destination = the SMK-37 port and audio input = its USB input; turn on Auto-Compensate Latency (Apple). Watch for MIDI loops, since the keyboard is both controller and destination.
- Drive other hardware: the Elite’s 3.5 mm MIDI out needs a TRS-to-5-pin DIN adapter (not included; Type A/B wiring isn’t stated — test yours).
Sampling in Logic
- Record the FM engine to audio (above) — the reliable resample route.
- Or sample straight in: Quick Sampler → Recorder mode → input = SMK-37, choose Wait for signal, record (Apple).
- Drag any region into Quick Sampler (Optimized trims and tunes it) (Apple).
- Chop: Quick Sampler → Slice; slices land on consecutive keys, or drop them onto DMD pads (Apple).
- Play it back from the pads with pressure mapped to a filter. Load a classic DX7 bank first and you have decades of FM sounds to sample.
MIDI Suite and firmware updates from the Mac
- MIDI Suite (editor) — sets channels, what each knob/fader/pad sends, velocity curves, and imports DX7-style presets. On M-VAVE’s downloads page, use “MidiSuite (new)”: the older V1.3.7 lists the Pro but not the Elite.
- M-UPGRADE (firmware updater) — Windows and Mac. The Mac build isn’t notarized: on first launch go to System Settings → Privacy & Security → Open Anyway. If it says “Failed to enter upgrade mode!”, leave it open and replug USB (fwradar, M-VAVE).
- Latest stock firmware: V016 (2026-08-12) — fixes key-note latency, adds Local Control and USB Rec, recentres pitch bend to 64. Download the Elite file for an Elite (release notes).
- Browser flashing (SMK37 OPEN and community firmware) needs desktop Chrome or Edge, not Safari. Quit Logic and other MIDI apps first so they don’t hold the port. See Firmware & hacking.
See it in action
- Yorzay — Logic Pro beatmaking sessions with an SMK-37 Elite
- M-VAVE — SMK-37 Pro: how to connect & set up
- William Albert — How to import DX7 sounds to the SMK-37 Pro
Bonus: Logic Remote on the iPad
Run Logic Remote on the iPad as a transport/mixer screen while the SMK-37 plays and tweaks — a nice split when the keyboard has no Logic transport of its own.
Mac troubleshooting
Logic doesn’t see the keyboard.
Power switch on; data cable; direct port; check Audio MIDI Setup → MIDI Studio; tick the port in Logic → Settings → MIDI → Inputs.
Bluetooth won’t connect.
You probably picked SMK-37 Elite (audio) instead of SMK-37 Elite_BLE. Hold BT until it flashes; disconnect it from any other host (iPad, phone) first.
Bluetooth MIDI drops when Logic launches.
A known macOS/BLE-MIDI quirk with several brands (Logic Pro Help): connect in Audio MIDI Setup after Logic is open, or use USB for sessions.
No sound from the keyboard’s headphone jack.
PATCH must be active for the internal synth. Logic’s playback only reaches the jack if the SMK-37 is Logic’s output device.
Notes lag or the first notes drop.
Update to firmware V016 — it fixed key-note send latency (r/midi thread).
Stuck notes.
Turn off Latch on Arp/Note Repeat (they won’t exit while latched); check the pedal setting (GLOBE K7: sustain vs expression); use Logic’s MIDI reset (Apple).
Crackles or wrong pitch when recording.
Sample-rate mismatch: match Logic’s rate to the device format in Audio MIDI Setup; avoid aggregate devices unless you need them.
Sources & links on this page (23)
- Elite manual manualf.oss-cn-hongkong.aliyuncs.com
- Apple support.apple.com
- Apple support.apple.com
- Apple support.apple.com
- Apple support.apple.com
- M-VAVE video youtube.com
- Apple support.apple.com
- via The Synth Source thesynthsource.com
- Apple support.apple.com
- release notes yms-file-store.oss-cn-hongkong.aliyuncs.com
- Apple support.apple.com
- Apple support.apple.com
- Apple support.apple.com
- Apple support.apple.com
- M-VAVE’s downloads page m-vave.com
- fwradar fwradar.com
- Logic Pro beatmaking sessions with an SMK-37 Elite youtube.com
- SMK-37 Pro: how to connect & set up youtube.com
- How to import DX7 sounds to the SMK-37 Pro youtube.com
- Logic Remote support.apple.com
- Logic Pro Help logicprohelp.com
- r/midi thread reddit.com
- Apple support.apple.com
Page last updated 2026-11-21 · Back to top