SMK-37 Field Guide Unofficial

Setup · iPad Pro

iPad Pro

Wireless MIDI into GarageBand, Koala Sampler, AUM, Drambo and Logic Pro for iPad, a five-minute sampling setup, and field-tested fixes for the things that trip everyone up.

Last updated

On this page
  1. Connect
  2. Where to pair, app by app
  3. M-VAVE’s Midi Suite app
  4. Koala Sampler: the five-minute sampling setup
  5. GarageBand
  6. Logic Pro for iPad
  7. AUM as a MIDI hub
  8. FM partners: KQ Dixie and Dexed
  9. Sampling the keyboard’s own synth into the iPad
  10. Firmware: use a Mac, not the iPad
  11. iPad troubleshooting
The #1 gotcha

iPadOS Settings → Bluetooth only ever pairs the SMK-37 as a Bluetooth audio device. Bluetooth MIDI is connected from inside your music app, using the entry ending in _BLE. The manual says the same: launch a BLE-compatible app such as GarageBand and connect from its settings (Elite manual).

Connect

Bluetooth MIDI (wireless)

  1. On the keyboard, hold BT until the light flashes. Steady = connected. It reconnects to the last host automatically, so disconnect it from your Mac first if you used it there.
  2. In the app, open its Bluetooth MIDI panel and tap SMK-37 Elite_BLE (Pro: SMK-37 Pro_BLE; on SMK37 OPEN firmware: SMK37 Elite Open_BLE). Where to find it in each app is listed below.
  3. App with no Bluetooth MIDI button? Connect once from an app that has one (GarageBand, Koala) or the free bridge midimittr, then open your app — the connection is shared system-wide.

The plain SMK-37 Elite entry in iPadOS Settings is Bluetooth audio: iPad sound playing out of the keyboard’s jack. It’s separate from MIDI and optional.

USB-C (wired)

A USB-C to USB-C cable into the iPad Pro works like a computer connection: the keyboard is class-compliant, so apps list it automatically (Apple, Logic Pro for iPad). The iPad will power — and charge — the keyboard, which drains the iPad. Charge the keyboard first, or use a powered USB-C hub for long sessions (Apple). USB is tighter than Bluetooth for finger drumming.

Know your channels

Keys send on MIDI channel 1, pads on channel 10. Change them by holding GLOBE and turning K2 (keys) or K3 (pads) (manual). Most “pads do nothing” or “everything plays the same sound” problems come down to this.

Where to pair, app by app

AppBluetooth MIDI pairing
GarageBandSettings (control bar) → Advanced → Bluetooth MIDI Devices → tap the device → Connect (Apple)
Logic Pro for iPadMIDI In/Out settings → Bluetooth MIDI Devices → tap “Not Connected” (Apple)
Koala SamplerSettings → MIDI → Bluetooth MIDI Connect (Koala manual)
Loopy ProMain menu → Bluetooth Devices (Loopy Pro wiki)
AUM, DramboNo verified in-app button — pair from GarageBand, Koala or midimittr first, then enable the input (Drambo: Settings → MIDI Inputs)

M-VAVE’s Midi Suite app

Midi Suite (free, by Sinco Audio) is the official editor for channels, what each pad/knob/fader sends, velocity curves and aftertouch, saved into the keyboard’s 8 presets. Don’t confuse it with CubeSuite, which is for M-VAVE’s pedals and loopers.

Then force-quit it

Midi Suite talks to the keyboard over Bluetooth MIDI, and a BLE MIDI device only serves one connection. After editing, swipe Midi Suite away in the app switcher, or your music app won’t see the keyboard.

Koala Sampler: the five-minute sampling setup

  1. Connect (USB, or Settings → MIDI → Bluetooth MIDI Connect).
  2. Hear keys and pads at once: ☰ → Settings → MIDI → MIDI Channel = All, and turn on MIDI velocity.
  3. Pads must send notes. Koala only triggers pads from note messages (Koala manual). In Midi Suite: Preset → Pads → Note mode (not CC/PC), write it to the keyboard’s preset, then force-quit Midi Suite.
  4. Map the pads: Settings → MIDI → Use MIDI mapping on → Map MIDI → tap an on-screen Koala pad, then hit the physical pad → Done. (Or skip mapping and set MIDI Note Offset to your first pad’s note.)
  5. Sample something — mic, line in or an import — onto a pad and play it from the SMK-37. Record a sequence by playing the pads.
Stuck playing one sample up and down the keyboard?

That’s Koala’s keyboard mode (a small keyboard icon top-right of the selected pad). Go to the SEQUENCE tab and toggle off the piano/keyboard icon on the left.

GarageBand

  1. Pair via Settings → Advanced → Bluetooth MIDI Devices, or plug in USB.
  2. Open a Touch Instrument (Keyboard, Drums, Sampler) and play.
  3. Beat Sequencer patterns “vanish” in Tracks view? The Beat Sequencer is a live pattern generator, not a region. Rewind to bar 1, press the main Record to print its output as a MIDI region, then switch the Beat Sequencer off so it doesn’t double-trigger. Now loop and drag the region in Tracks view.

Logic Pro for iPad

AUM as a MIDI hub

Open AUM’s MIDI matrix (the curved Z-shaped icon), connect the SMK-37 to your instruments, and use each destination’s MIDI filter to split channels (AUM help). A clean recipe: SMK-37 → a synth filtered to channel 1 (keys), and SMK-37 → Koala or Drambo filtered to channel 10 (pads). Drambo: Settings → MIDI Inputs → enable the keyboard as Track and/or Control, then use MIDI Learn (Drambo guide).

FM partners: KQ Dixie and Dexed

The SMK-37’s engine is DX7-style, so iPad DX7 apps make natural partners — load the same .syx banks on both: KQ Dixie 26 (6-op FM, AUv3, SysEx import) and Dexed Synth (AUv3, loads 32-voice cartridges). Layer the keyboard’s own FM voice under an iPad voice, or sample the iPad version.

Sampling the keyboard’s own synth into the iPad

Turn on PATCH first — the internal synth is silent without it. Then try, in this order:

  1. USB audio. On a Mac the keyboard is a USB audio input; on iPadOS it should appear as an input in Koala, GarageBand or Logic. Unverified on iPad — one reviewer reports the iPad doesn’t treat it as a proper audio interface (review). Test it.
  2. The 3.5 mm output (Elite) into any iPad-compatible audio interface or USB-C adapter with an input. Always works.
  3. Not Bluetooth: the keyboard’s Bluetooth audio is a receiver (iPad → keyboard), not a source.
  4. Sidestep it: load the same DX7 patch into KQ Dixie or Dexed on the iPad and sample that.

Firmware: use a Mac, not the iPad

The official updater (M-UPGRADE) is Windows/Mac only, and browser flashers need Web MIDI with SysEx in desktop Chrome or Edge. Safari has no Web MIDI on iPadOS, and Chrome on iPad uses the same engine. Web-MIDI browser apps exist, but flashing through one is unverified and a failed flash can brick the keyboard. Flash from the MacBook; play on the iPad. See Firmware & hacking.

iPad troubleshooting

The app can’t find the keyboard.
  1. Hold BT until the light flashes.
  2. Pair inside the app, not in Settings, and pick the _BLE entry.
  3. Make sure it isn’t still connected to your Mac or phone — it reconnects to its last host.
  4. Force-quit Midi Suite and any other app that grabbed it.
  5. Toggle iPad Bluetooth off/on and power-cycle the keyboard.
On SMK37 OPEN firmware, an old pairing stopped working.

The name changes to SMK37 Elite Open_BLE. Use FORGET MIDI PAIRS and remove the old entry before re-pairing (README).

Keys and pads trigger the same sound.

Both are reaching one instrument. Split by channel (keys 1, pads 10) per track, or filter in AUM.

Pads do nothing in Koala.

Pads are sending CC/PC. Set Note mode in Midi Suite, write it to the preset, force-quit Midi Suite.

Dropped notes over USB.

Power: charge the keyboard first or use a powered hub. Lower the app’s buffer for latency.

Sources & links on this page (15)

Page last updated 2026-11-21 · Back to top