SMK-37 Field Guide Unofficial

Play now · first 30 minutes

Start here

Charge it, update it, learn the one trick that unlocks every menu, play the built-in FM synth, and make your first connection.

Last updated

On this page
  1. Minutes 0–5: power and sound
  2. Minutes 5–10: update the firmware
  3. The one trick: hold and turn
  4. Minutes 10–20: a tour of the controls
  5. The FM engine in one paragraph
  6. Minutes 20–30: your first connection
  7. Good first videos
  8. Your first week
  9. Elite or Pro? What differs

Minutes 0–5: power and sound

  1. Charge over USB-C. 2000 mAh battery, roughly 10 hours; it also runs on USB power. LED on USB: red = charging, green = full (Elite manual).
  2. Leave the wheels at rest and switch on with the rear power switch — the wheels calibrate at boot.
  3. Plug headphones or speakers into the 3.5 mm out. There’s no built-in speaker.
  4. Press PATCH. The internal synth only sounds while PATCH is active — “when the Patch button is unpressed, the audio output port will not produce any sound” (manual). Play.

Minutes 5–10: update the firmware

Do this once, first. Official firmware V016 (2026-08-12) fixed key-note lag and dropped first notes, added a wheel calibration mode and Local Control, and recentred pitch bend (release notes). Use M-VAVE’s M-UPGRADE app on a Mac or PC with the firmware file for your model — Elite file for an Elite, never the Pro one (downloads). Step-by-step for the Mac is on Mac + Logic Pro.

The one trick: hold and turn

Almost everything works the same way: hold a function button and turn encoders K1–K8 to edit that page. Each page has a Latch setting that keeps it on screen after you let go. The OCTAVE−/OCTAVE+ buttons double as page left/right inside menus (manual).

Minutes 10–20: a tour of the controls

Hold……and turn
PATCHK1–K4 pick a preset in banks A–D (4 × 32 = 128 FM sounds) · K5 Latch · K8 Save
PARAK1 Algorithm (1–32) · K2 Feedback · K3 Mono/Poly · K4 Volume · K5 Latch
FXK1 Cutoff · K2 Distortion · K3 Reverb · K4 Delay · K5 Latch
ARPK1 Mode (Up, Down, Incl, Excl, Random, Order, Repeat) · K2 Octave · K3 Gate · K4 Swing · K5 Tempo · K6 Rate · K7 Latch
NOTE REPEATHold a pad to retrigger · K1 Gate · K2 Swing · K3 Tempo · K4 Rate · K5 Latch
SCALEK1 root · K2 scale (Major, Minor, Dorian, Lydian, pentatonics, World 1–5). Wrong notes snap into key.
CHORDK1 quality (Maj/Min/Dim/Aug) · K2 type (Triad to 13th)
SEQK1 Pattern (8) · K2 Mode · K3 Steps (up to 64) · K4 Gate · K5 Swing · K6 Tempo · K7 Rate
GLOBEK1 preset 1–8 · K2 key channel · K3 pad channel · K4/K5 velocity curves · K6 pad aftertouch · K7 pedal sustain/expression · page 2: factory reset

From the Elite manual; the Pro has the same control set. Banks: KNOB BANK → encoders 9–16, FADER BANK → faders 5–8, both together → pads 17–32.

Things to try

The FM engine in one paragraph

It’s a 6-operator, 32-algorithm emulation of the classic Yamaha DX7, 12-voice polyphonic, with 128 presets in four banks (manual, The Synth Source). On the keyboard you can only tweak a handful of things (algorithm, feedback, mono/poly, volume, filter, distortion, reverb, delay); deep editing needs a computer. The big win is that it reads DX7 SysEx, so 40 years of free patches are available — import them with M-VAVE’s MidiSuite or a browser tool such as fm1-dx7-patch-importer. Imports overwrite presets with no undo, so note what you’re replacing. It has no drum sounds; use the pads to drive your Mac or iPad for drums.

Minutes 20–30: your first connection

Controller, synth, or both?

The keys always send MIDI over USB, Bluetooth and the TRS out, and they also play the internal synth whenever PATCH is on. If you hear a doubled sound when playing your DAW, turn PATCH off, or use Local Control (V016) to unhook the keys from the internal synth.

Good first videos

More on the Watch page.

Your first week

#Session (30–60 min)
1Own the box. Redo the 30 minutes from memory, save a favourite preset, and note the pad note numbers using Logic’s Event List (M-VAVE doesn’t publish them).
2Drum kit on the pads. Logic → Electronic Drum Kit → Drum Machine Designer; Learn Note each cell (how).
3Chop a sample in Koala on the iPad and play it from the pads (how).
4Resample the FM synth into Quick Sampler (recipe A).
5Load a DX7 bank. Back up the factory bank first (imports have no undo), try one voice, then one bank slot.
6Try the official SMK37 OPEN groovebox — factory restore is built in (firmware page).
7Try one community firmware (e.g. Snoop37), with a full flash backup and the way back ready.

Elite or Pro? What differs

Less than you’d think. M-VAVE’s own Pro page lists the same three jacks as the Elite (3.5 mm audio out, 3.5 mm MIDI out, ¼″ sustain), the same battery and the same size (Pro page, Elite page) — some retail listings claiming the Elite adds the jacks are wrong. The real differences: the name and colourway (the Elite is grey and orange), the firmware identity, and, according to reviewers, a reworked keybed with smoother knobs and wheels plus an FL Studio mode (Audiowords). What matters for safety: firmware files are model-specific — always use the file for the model you own.

Sources & links on this page (14)

Page last updated 2026-11-21 · Back to top